25 views
in Construction and Repair by (10.6k points)

How do you install a toilet?

Please log in or register to answer this question.

1 Answer

0 votes
by (7.8k points)

To install a toilet, you will need the following tools and materials: a new toilet, a wax ring, bolts, a screwdriver, an adjustable wrench, a putty knife, a hacksaw, a level, a caulking gun, and caulk. Here is a general outline of the steps involved in installing a toilet:

  1. Remove the old toilet: Shut off the water supply, disconnect the water line, unscrew the nuts holding the toilet in place, and lift the old toilet off the flange.

  2. Prepare the area: Clean the flange and remove any old wax residue with a putty knife.

  3. Install the wax ring: Place the new wax ring on the flange, ensuring it is centered and level.

  4. Install the new toilet: Set the new toilet over the flange and press down firmly to create a good seal with the wax ring. Secure the toilet in place with bolts and nuts, but do not over-tighten.

  5. Connect the water supply: Reconnect the water line and turn on the water supply.

  6. Test the toilet: Flush the toilet and check for any leaks. Make sure the toilet is level and stable.

  7. Caulk the base: Apply a bead of caulk around the base of the toilet to seal it to the floor.

  8. Finish up: Trim any excess bolt length,_

Related questions

1 answer
asked Mar 19, 2024 in Construction and Repair by abd99872 (10.6k points)
1 answer
asked Mar 19, 2024 in Construction and Repair by abd99872 (10.6k points)
1 answer
1 answer
asked Mar 19, 2024 in Construction and Repair by abd99872 (10.6k points)
1 answer
asked Mar 19, 2024 in Construction and Repair by abd99872 (10.6k points)
...