23 views
in Auto by (0 points)
How to change a flat tire?
related to an answer for: How to change a tire?

Please log in or register to answer this question.

2 Answers

+1 vote
by (0 points)
selected by
 
Best answer
  1. Prepare the car. Apply the handbrake and remove all passengers from the car. ...
  2. Position the wheel chocks. Chocks prevent the car from rolling while jacked up. ...
  3. Loosen the wheel nuts. ...
  4. Jack the car up. ...
  5. Remove the flat tyre. ...
  6. Mount the spare wheel. ...
  7. Lower the car and tighten the bolts. ...
  8. Fully lower the car.

+1 vote
by (0 points)

To change a flat tire, you will need the following items: a spare tire, a jack, a lug wrench, and your vehicle's owner's manual. Here are the basic steps to change a flat tire:

  1. Find a safe location to pull over and turn on your hazard lights.
  2. Loosen the lug nuts on the flat tire with the lug wrench.
  3. Place the jack under the vehicle in the specified lifting point and raise the vehicle until the flat tire is off the ground.
  4. Unscrew the lug nuts completely and remove the flat tire.
  5. Install the spare tire onto the wheel studs and hand-tighten the lug nuts.
  6. Lower the vehicle with the jack and tighten the lug nuts in a crisscross pattern.
  7. Lower the vehicle completely and double-check the lug nuts to ensure they are tight.
  8. Pack up your tools and flat tire, and drive to a repair shop to have the flat tire repaired or replaced.

Always refer to your vehicle's owner's manual for specific instructions on changing a flat tire for your particular vehicle.

...